C54 Pre-launch Purchase Opens to Founder Now. Click here for more info.



News

WPL Christmas Coupon Hunt! Starts Now!

Posted by Edward Chew on

The Easter Egg Hunt in April was super fun! So we reintroduce for WPL Christmas Coupon Hunt! Coupon 1 is now placed in the store! Sample as below! Tips : Text only 10 coupons per week use it immediately after you found it as everyone is eligible min purchase of US$50 If the code doesn't work, it's either all 10 is used or you didn't hit the min US$50 spend. Look out again next week. I'll comment here whenever I have placed the next coupon. Visit www.wpl-rc.com to start hunting for your christmas gift now! Good luck and Merry Christmas! Update of...

Read more →


5mm to 12mm Wheel Adapter .stl

Posted by Edward Chew on

3D File submitted by Mark Cooke Download file - Click here Adapter to fit standard Tamiya type hexes to WPL Axles. The unit is my own design , in collaboration with Liam Sullivan (THYC RC). Recommended for wheels up to 80mm diameter, I advise using a washer with the standard wheel screw or replacing the screw with a M2 5mm flange head type. Primary use scale models and low speed crawlers. For High speed applications I recommend printing in PETG or Nylon   Printed in PLA initially on Creality Ender 3   **IMPORTANT** ensure that Esteps are calibrated and belts...

Read more →


3D Printed Roof Rack for C44KM

Posted by Edward Chew on

  Contributed by Daniel Gonzalez Just a quick remix of edwardchew's amazing work here: https://www.thingiverse.com/thing:3905820 The half_rack option he made was still too large for the C44 so I made it shorter and just wanted to share the results and file I made since I really didn't do anything. I also de-badged as I don't like logo's on things I remix. Enjoy! Download - Click here

Read more →


3D Printed Tires for D12 RWD Drift

Posted by Edward Chew on

Video above demonstrating the drift as well as the setup and other stuff needed like the gyro. The grip level has been fine tuned. Front has 12mm contact patch, Rear has 7.5mm contact patch so you can kick the rear out easily yet still with enough speed or print the 10.1m width one for more rear grip. Depending on what surface you are running, I find low throttle setting works well and more controllable.  Print with 0.2 or 0.3 layer height. Min 3 outer layers. Infill around 20-25% will do. Material - use PLA, not TPU or any flexible filament...

Read more →


China National Day - 1st to 7th Oct

Posted by Edward Chew on

Hi all, China's National Day falls on 1st to 7th October. We are still taking orders normally but expect delay of your fulfillment or shipment. Official Store - Off on 2nd and 3rd Oct Domestic shipping - Off on 29th to 1st Oct Factory - Off on 1st & 2nd Oct Yun Express : Off on 1st and 4th Oct For customer service, I'll reply as much as I can :-) As you can see various departments taking off on different days, therefore you can make orders as usual and we will try to get it shipped as quick as...

Read more →