3D File submitted by Mark Cooke
Download file - Click here
Adapter to fit standard Tamiya type hexes to WPL Axles. The unit is my own design , in collaboration with Liam Sullivan (THYC RC). Recommended for wheels up to 80mm diameter, I advise using a washer with the standard wheel screw or replacing the screw with a M2 5mm flange head type. Primary use scale models and low speed crawlers. For High speed applications I recommend printing in PETG or Nylon
Printed in PLA initially on Creality Ender 3
**IMPORTANT** ensure that Esteps are calibrated and belts are tight, as tolerances on the part are critical. Do not exceed 37.5mm/sec print speed. I recommend using a raft for this print.
I used AMZ3D PLA, running at 210/70, but refer to your own brand of PLA for temp settings.
Hope this file is of use to you, any questions/advice please email email@example.com and I’ll get back to you as fast as I can
Don’t have a 3D Printer? I can supply these in the UK for £5.99 including postage for 12 pieces, again please email firstname.lastname@example.org with any enquiries. Please note that currently I can only supply this item in PLA.
Please feel free to print for your own use, but please respect the designers and do not print commercially without permission.